You can take some denatured alcohol or fingernail polish on a cloth and lightly rub it on an inconspicuous test area.If the paint softens and is easily removed, then it is a latex paint. If the paint does not really seem to be affected by the test, it is typically an alkyd coating.

No. These types of products do not actually have primer mixed into them. The “Paint and Primer” products use quality resins that allow for good adhesion. This helps to eliminate the use of primers in most circumstances

In general, flat and low sheen paints do not have a high amount of scrubbabilty. Areas that are of higher traffic or that are washed should be painted with a higher sheen product. At minimum, a “Satin” type or higher sheen is usually recommended in those areas for their overall durability.

Depending on color choice, atmospheric conditions, and other variables, latex paint may take up to 60 days for a “full cure”. In most cases, latex paint can be put to normal use after a day or two. Fresh latex should be allowed to cure for at least 14 days before attempting to wipe or wash the walls. It can be sensitive to water or chemicals during the curing process.

There are several reasons why paint will not cover in one coat.

Some of the main reasons include drastic color changes i.e. light to dark color or even dark to light color, thinning the product, stretching the product near or beyond its coverage rate, or improper roller cover used.

The coverage rates on the container are based off of a theoretical calculation. This calculation does not account for any loss due to product left in the container, roller covers, brushes, or variations in the surface that it is applied to.

Depending on the aforementioned variables as well as overall surface porosity, you may see a lesser spread rate than what the “theoretical” coverage rate is on the container.

Lighting, architecture, and room decor are three environmental factors to consider when choosing a paint color. An ideal paint color is one that considers the all three elements and provides balance and unity to the space.

Disruption is kept to a minimum. At the end of each day our crews will clean the areas we are working in and move tools and paint to a shop area (garage or basement).